I've designed a custom 3D printable mounting solution for the Mammotion RTK module, the positioning brain behind Mammotion’s autonomous robot lawnmowers.

This mount lets you securely fix the RTK module to a wall or wooden post, keeping it elevated and unobstructed for optimal signal strength. It features:

• A snug cylindrical fit for the RTK stalk
• A robust mounting base
• Easy assembly and disassembly using a sliding connection between base and pole (no need to remove the base from the wall in the winter)
• Outdoor durability (designed for optimal water/rain drainage)

If you're using a Mammotion mower and need a solid RTK mounting solution, this is a clean and practical drop-in option. Feedback is welcome – I'm always looking to improve my designs!

Print and mounting instructions

• Material: PETG, ABS or ASA recommended for outdoor use
• Layer Height: 0.2 mm
• Infill: base: 20%, pole: 100%
• Supports: Yes, for the base. Tree supports recommended

The holes for the screws are 5mm and the channel is to guide the screw is 8mm.

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Companion subscription.