I designed a 3D printable Velbon Quick Release System for all Cameras & Video Gear with a Quarter Inch Thread.

Bill of Materials

• 1/4 inch hex nuts
• 1/4 inch hex or round head screws
• a couple of M3 hex nuts
• 10 mm M3 round head screws
• If you like, some Super Glue

Print Settings

PLA Filament (Prusament) Print Temp: 215°C First Layer / 210°C 2nd Layer onward Perimeters: 3 Infill: 25%

I am printing with a Creality CR-6 SE

Check out my YouTube Video for more details: https://youtube.com/shorts/Q1RyB3RzJKM

License Type = CC BY-NC-SA (CC Attribution-NonCommercial-ShareAlike)