Life-Size Earring Display Stand – STL File for 3D Printing

Show off your earring creations with this elegant and practical life-size earring display stand STL file! Designed for makers, crafters, and sellers, this sleek stand features a realistic ear shape perfect for photographing or showcasing dangle earrings in full scale.

Bonus: a hidden storage pocket in the back for storing other earring, extra hooks or display cards.

Licensing: Want to sell your creations? You’re covered! This STL file comes with a life-time commercial license, so you can print and sell with confidence. With this file, you're free to print and sell your finished prints without restriction—ideal for artists, small businesses, and online sellers.

Product Features:

• Life-size earring display with realistic ear detail
• Built-in storage holder in the rear for small accessories
• Clean, minimalist design ideal for booths, photos, and shops
• STL file format – ready for 3D printing
• No AMS required – print in a single color or use filament swaps for variety
• Commercial license included – sell printed items with no subscription

Perfect for craft fairs, online listings, or your personal display needs.

👉 Download and start printing your own earring display today!

Assembly Note Pieces are designed as a tight fit between parts. Slight pressure may be required to snap together. Two versions of the ear part and base are included. One base has larger fit tolerances for printers that have less accuracy. The ear part has two version depending on print orientation. Pieces can be scaled up without a problem. Scaling down will require some adjustments with the fit tolerances. Please reach out if you need assistance.

Assembled Dimensions: Height: Approx. 8.70 inches Width: Approx. 4.11 inches Depth: Approx. 5.00 inches

Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm Standard settings. Filament used was PLA and PLA+. Plate used was Bambu Textured PEI Plate.

Recommended Print Settings:

• Supports – YES but minimal
• Support Type - TREE SLIM
• Supports on Build Plate Only
• Threshold Angle - 30 degrees
• Remove Small Overhangs - NO
• Brim – NO – unless you have adhesion issues
• Top Z-Distance - .28
• Bottom Z-Distance - .28
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Infill – 15% or more if you would like stronger lines
• Wall Loops – 2 or 3
• Ironing – Optional for top surfaces