This is my Crystal FoxWood Dice Tower, a little magical forest stump where your dice can go on a mini adventure of their own!! I delayed it a little bit so I could flesh out a few details on it!!

Drop your dice in through the top, and they’ll roll and tumble down the hidden stairs inside, coming out into a cozy crystal-fenced tray at the bottom. 📖🎲

Sitting on the edge of the stump is a mischievous three-tailed Kitsune, peeking over to watch the action unfold (or maybe guiding your luck 👀🦊). She’s such a little cutie and makes the whole tower feel extra enchanted~

Recommended Print Settings:

Layer Height: .16 Infill: 15% Supports: Not needed Adaptive Layer Height recommended (but will slow print down) Slow down first five layers as this print includes ball joints that require extra adherence to the build plate. Make sure your first layers stick adequately! Pro Tip: If the first layers struggle to stick, try slowing down your first layers or increasing the bed temp slightly. Tested down to 70%

Hi there! I'm Mouse and I love art & 3D printing. I am inspired by cottage-core, fantasy, and kawaii things! Thank you for taking the time to read this. :)

If you like this design, please check out my other models: cults3d.com/en/users/StarMouse3D/creations

StarMouse3D creations are protected by copyright. These files are for personal use only, and you do not have the right to sell the files or the models without explicit consent from me.

To legally obtain permission to sell PHYSICAL prints you may obtain permission to sell every model as an active Patreon supporter through this link: patreon.com/c/StarMouse3D

Please do not share digital files! Thank you.

Please be warned that these models are not toys and not recommended to be printed for young children, or anyone at risk of a choking hazard. There are small parts that can be broken off if roughly handled. Print at your own risk!