Sapphi the Spirit Dragon is back, stronger, cuter, and more flexible than ever! 💖 When I originally made her a loooong time back, she was one of my very first 3D print models, and while I loved her, I knew she had some issues—especially with her links and mesh. So, instead of just tweaking the links, I went all in and gave her a full upgrade!!! Yay!!

As a little note, keeping true to my original design of Sapphi, she does not print curved as she is a smol bean, but she is still decently chonky when printed at full-size diagonal across the print bed.

Files Included: 🌟Sapphi V2 3MF & STL File -Does not include original Sapphi.

Hi there! I'm Luna and I love art & 3D printing. I am inspired by cottage-core, fantasy, and kawaii things! Thank you for taking the time to read this. :)

If you like this design, please check out my other models: https://cults3d.com/en/users/StarMouse3D/creations

StarMouse3D creations are protected by copyright. These files are for personal use only, and you do not have the right to sell the files or the models without explicit consent from me.

To legally obtain permission to sell PHYSICAL prints you may obtain permission to sell every model as an active Patreon supporter through this link: https://www.patreon.com/c/StarMouse3D

Please do not share digital files! Thank you.

Please be warned that these models are not recommended to be printed for young children, or anyone at risk of a choking hazard. There are small parts that can be broken off if roughly handled. Print at your own risk!

Recommended Print Settings:

Layer Height: .16

Infill: 15%

Supports: Not needed

Pro Tip: If the first layers struggle to stick, try slowing down your first layers or increasing the bed temp slightly.