THE AMAZING MINI BOXERS - NOW COME WITH THE CYBER CLAW PACK!

This reliable print in place mechanism makes for fast assembly, fast action and print strength! Print them for friends.... or your kids, or your friends kids... and their friends!

BUT WHO WILL BE THE CHAMPION??!!

The all-in-one arms comes off the plate stiff, but only takes a quick crack to free the joints.

FOR BEST PERFORMANCE.

1. Ensure you do not have supports turned on for the mechanism objects. And boxing glove infill should be low ( 5-10% gyroid is great).

2. To release the joints. Squeeze the opposite corners while wrapped in a cloth to avoid a pinched finger.

3. With all joints free-moving, rapidly move each joint in the mechanisms to work it in, moving back and forth for the full range, and apply a slight twist pressure. This warms up those internal surfaces and cleans up bits that may cause unwanted friction.

4. Before adding the gloves - use a toothpick or fork to pop out a little circular support inside the blade slot.

The are three sizes in the project. Print same size plates. Large for adults. Small and medium for kids. If you do need to adjust sizing, you'll need to scale everything - or let me know your measurements and I can make rings that fit better.

I hope you find it as fun as I do! Happy printing!

We're always tweaking our models and appreciate you feedback!