The SLEEK BULB vase has a rounded, bulbous shape with smooth vertical curves. The wide body tapers gently toward the top and bottom. This design feels timeless and brings a sense of calm to your space.

Place this vase on your sideboard or shelf. The wavy opening works well with a small bouquet of dried flowers or eucalyptus branches, but the SLEEK BULB vase is also elegant on its own. It adds a refined, understated touch to your interior.

Size: 9.2 x 20 cm (scale as you like) Print time: 3-5 hours Resizable: yes, in your slicer. 3D Model Type: Solid body Printing technique: FDM / FFF File type: STL Recommended materials: PLA, PETG, ABS, ASA Print difficulty: easy Vase Mode enabled: yes

Happy printing!

Recommended nozzle diameter and print settings

Nozzle diameter: 0.8 mm Bottom and top layers: 4 Infill: 0% Perimeters: 1 (enable the vase mode setting in your slicer) Perimeter speed range: 25-45 mm/s Layer height range: 0.25 mm-0.4 mm Extrusion width / wall thickness range: 1 - 1.2 mm Watertight: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height (0.1-0.15mm) and slower print speed (25-30mm/s) for improved layer adhesion.

License info: PERSONAL USE ONLY. 3D printed objects of this 3D model may not be sold or used commercially in any way without an active commercial license. Thank you for your understanding.

Each model takes hours of designing, testing, and refining to get right. If you'd like to 3D print and sell this design commercially, or simply want to support my work so I can keep creating and sharing free designs, please consider joining my Patreon or Thangs Membership.

Thank you for respecting the time and effort that goes into each creation.