This is the soda can cover emoticons series bundle. a complete series of my previous upload. based on my own need sometimes I can't finish my drink at a time and need to keep it in a fridge, or sometimes brought it inside a car while travelling so I think a cap or a cover will be a good idea to maintain the taste still good to drink for later day. also to protect them from spilling.

just found it lately that this soda cap also can be use for another thing such as a cover for tube gifts, drinking glass cap, jar cover and also to cover some furniture open pipes with a minor scale adjustments.

This design size are measured based on 54 mm diameters of soda can lip. but I found two another soda can with different size and so I've checked that this design will still functional if you scale it at both horizontal direction

I'm using two materials for this, the outer part was printed with PLA for stronger and clean looks and the inner part with TPU for tighter airlock and liquid.

*for printing with no AMS, basically you can manually print the first layer with emoticons image until it's done, change filament, and then continue printing for second layer without removing the first print from bed plate. just clean the test print part made by your printer at first.

and I've tried that printing with multiple objects at once without AMS can be a little tricky, so I guess that will be easier if just print it one by one.