this tobacco vs zombies cigarette case can be filled up to 21 pieces of 8mm tube regular filter cigarettes or RYO tubes. self locking lid. no need another materials, just print it and use it. there are three variant in the download, plain cigarette case, zombie and smiley version. along with single or multicolor 3Mfs also STLs.

easy to assembly just as shown in the video. just do a little trick before snap the cap part onto the case. put one side of the cap into 80 degrees celcius bed plate for at least 60 second, place the cold joint first to the case hole and then followed with pre heated side of the cap. that trick will prevent the joint side of that cap to be broken. wait a little while until it's colder before using.

hope you'll like this. Thank You! and long live smokers!

3D PRINTING SETTINGS :

0.4 Nozzle 0.16 layer height 100% infill ABS, easy ABS, ASA, PETG, PLA (ABS recommended) Bambu lab slicer (Test printed on Bambulab A1 mini) Ready to print in multicolor Snap in Assembly NO SUPPORT needed