It finally happened! The turtles shed their adornments and have revealed their shell.

New joints on head and legs! Plus all of "adult" turtles have wiggle tails!

They can still be printed at 45% for everyone who likes to make earrings out of them.

Painted 3mf included. Verify settings; what works for me may not necessarily be the correct setting for your printer. Verify flushing volumes.

Printing recommendations: .20 layer height Print in place, no support required 3 walls - 15% infill Allow the plate to cool before removing the prints Reduce acceleration and adjust overhang speeds as needed

Filaments: Protopasta - Moonstruck White Satin Protopasta - Bottle Brown Protopasta - Kermies Green Protopasta - Wonderblack Rainbow Glitter

Important Please Read: All Rebel Alicorn Designs are protected under Copyright Law. With your purchase, you are given the right to download and print the design for your personal use only. You do NOT have permission to resell, remix, or redistribute the digital files in any way. No alterations to the designs are permitted. Prints of the designs cannot be sold without permission. To sell the PRINTS of Rebel Alicorn Designs, you must obtain authorization by joining the “Legacy Merchant Tier or Merchant Tier” on Patreon, Thangs, or MMF.

More designs are coming soon! Check out my socials and give a follow to keep up to date.

Warning: NOT suitable for unsupervised play by children or pets. Small parts can become a choking hazard if broken off due to rough play and broken 3D printed parts can create sharp edges. NOT recommended for children under 3.