Meet the Sagittarius Pony, the cosmic adventurer of the zodiac!

Full of wanderlust and star-bright energy, this little explorer is always chasing new horizons, learning new things, and spreading joy wherever they trot. A free spirit with a fiery tail and a heart full of curiosity!

Painted 3MF included. Please double-check that the settings work with your printer before starting. Always begin a new project and verify your flush settings to ensure the best results

Do not go below 70% - Shown in the picture are 80%, 50% and 45% - The smaller two work, but the front legs need a bit of wiggling to get them to wiggle free.

Printing Recommendations:

Initial layer and initial fill: 25 - 50 mm/s

Layer Height: 0.20 mm

Walls: 3 Infill: 15%

Supports: No Supports Needed

Cooling: Let the plate cool completely before removing your print to avoid warping or damage.

Printer Acceleration: Slow down printer acceleration for smoother results. Printing the outer walls at half speed helps create a nice, clean finish.

Looking for more designs? 🛍️ Browse the full collection in the Rebel Alicorn MMF Store

⚠️ Important – Please Read: All Rebel Alicorn Designs are protected under Copyright Law. Your purchase grants you the right to download and print the design for personal use only. You do not have permission to: Resell, Remix, Alter, or Redistribute the digital files in any form No design modifications are allowed. Except for keyring holes and straw holes, other changes must be approved. Selling physical prints of any Rebel Alicorn design requires authorization. To become an authorized seller, you must join the “Merchant Tier” on Patreon, Thangs, or MMF.

⚠️ Safety Warning: These designs are not suitable for unsupervised play by children or pets. Broken or rough-played 3D prints may produce sharp edges or small parts that can pose a choking hazard. Not recommended for children under age 5.