Hey everyone!

With fall slowly creeping in, I thought it’d be the perfect time to bring you some pie-themed clicker fidgets! 🥧

This set features seven interchangeable pie tops, plus a bonus: a spinning pie base that adds an extra twist to your fidgeting fun.

It’s a sweet way to keep your hands busy and your mind happy this season!

Painted 3MF included. Please double-check that the settings work with your printer before starting. Always begin a new project and verify your flush settings to ensure the best results.

I used Kailh Box Navy Switches - You must either bend the prongs or clip them.

Magnet Version Notes: The magnet embed is modeled as a negative space, so you can easily resize it to fit whatever magnets you have on hand!

The default size is designed for 30mm x 3mm round magnets (spacing is 31mm x 4mm to account for different filament and tolerances), which can be found here.

The magnets can be annoying that I used...I have had a few of them break, but they are pretty strong, even being embedded by two layers.

Printing Recommendations: Initial Layer & Infill Speed: 25 mm/s Layer Height: 0.20 mm Walls: 3 Infill: 15% Supports: None needed — this design prints in place! Cooling: Let the plate cool completely before removing your print to avoid warping or damage. Printer Acceleration: Slow down printer acceleration for smoother results. Printing the outer walls at half speed helps create a nice, clean finish.

Looking for more designs? 🛍️ Browse the full collection in the Rebel Alicorn MMF Store

⚠️ Important – Please Read: All Rebel Alicorn Designs are protected under Copyright Law.

Your purchase grants you the right to download and print the design for personal use only. You do not have permission to: Resell Remix or alter Redistribute the digital files in any form

No design modifications are allowed. Except for keyring holes and straw holes, other changes must be approved.

Selling physical prints of any Rebel Alicorn design requires authorization. To become an authorized seller, you must join: “Merchant Tier” on Patreon, Thangs, or MMF.

⚠️ Safety Warning: These designs are not suitable for unsupervised play by children or pets. Broken or rough-played 3D prints may produce sharp edges or small parts that can pose a choking hazard. Not recommended for children under age 5.