Pie Turtle Clickies! I hope you apple, pear, cherry, blueberry, and Strawberry pie!

There is a dot on the bottom of the top that shows you the front. You can remove it, but you need to keep the direction of the fruit or the pie top won't look right.

Please make sure you have a clean bed and good adhesion.

Slow that initial layer down to 25 along with the initial layer infill. The 3mf is already set to the slow beginning speeds, but those of you who do not use the 3mf, slow down that first layer. Can you run it faster....yes...the odds of it messing up will increase.

• DO NOT change the size of this turtle! If you are having issues with the top being too loose or tight. You can increase or decrease the size by .05%.

I do not recommend using matte or silk for the top piece unless it is an accent color - These two filaments were softer, and the top does not stay in as it should. You may need to add a tiny dab of glue to get the top to stay on.

The two brands of keyboard switches I used were Kailh and Gateron. The Gaterons are silent.

https://a.co/d/4vmW5Jk - Kailh Switches

https://a.co/d/eXLILuI - Gateron Switches

Painted 3mf included. Verify settings; what works for me may not necessarily be the correct setting for your printer. Verify flushing volumes.

Printing recommendations:

Initial layer and initial layer infill Speed - 25 .20 layer height Print in place, no support required 3 walls - 15% infill Allow the plate to cool before removing the prints

Filaments: Protopasta - Bottle Brown Protopasta - Amie's Blood of my Enemies Protopasta - Banana Smoothie Protopasta - Clover Green Protopasta - Galatic Empire Metallic Purple Protpasta - Cupids Crush Pink

Important Please Read: All Rebel Alicorn Designs are protected under Copyright Law. With your purchase, you are given the right to download and print the design for your personal use only. You do NOT have permission to resell, remix, or redistribute the digital files in any way. No alterations to the designs are permitted. Prints of the designs cannot be sold without permission. To sell the PRINTS of Rebel Alicorn Designs, you must obtain authorization by joining the “Legacy Merchant Tier or Merchant Tier” on Patreon, Thangs, or MMF.

More designs are coming soon! Check out my socials and give a follow to keep up to date.

Warning: NOT suitable for unsupervised play by children or pets. Small parts can become a choking hazard if broken off due to rough play and broken 3D printed parts can create sharp edges. NOT recommended for children under 3.