Hey there, Rebels! A fun ostrich with a savannah mini world has arrived.

Ostrich will scale to 60%

Mini world printed at 90%

The features of the mini world will need to be glued. You will need to hold the tree in place for a moment while the glue dries. The tree requires support if you have it lying down on the plate - I did this to give the tree more texture.

Multicolor 3MF Included - Adjust settings for your printer as needed.

PLEASE READAll Rebel Alicorn Designs are protected under copyright.

This purchase is for personal use only. Digital files may not be shared, resold, remixed, or redistributed in any form. Selling physical prints is not permitted without authorization.

To sell PHYSICAL PRINTS, you must join the Merchant Tier on Patreon, Thangs, or MMF Tribe. Merchant members receive exclusive designs and discounts on past files.

Filaments Used:

Polymaker -Sandstone Marble

Polymaker - Matte White

Polymaker - Black

Protopasta - Holiday Pine

Mini World Filaments:

Polymaker - Matte Green

Polymaker - Matte Wood Brown

Polymaker - Matte Light Blue

Polymaker - Matte Army Beige

Printing Recommendations:

Initial layer and initial fill: 25 mm/s

Layer Height: 0.20 mm

Walls: 3 Infill: 15%

⚠️ Safety Warning: These designs are not suitable for unsupervised play by children or pets. Broken or rough-played 3D prints may produce sharp edges or small parts that can pose a choking hazard; not recommended for children under the age of 5.