🔥🐢🦝 Dumpster Fire Turtle — featuring built-in Trash Panda vibes!🦝🐢🔥

Because some days… you are the turtle hauling a dumpster fire while a raccoon rides your head like this is normal. He's a support animal...100% safe for work.

Introducing the Dumpster Fire Turtle — a chaotic little companion for those "everything is fine 🔥" moments. With sculpted flames, a dumpster on its back, and a permanently unbothered raccoon along for the ride, this design perfectly captures the spirit of surviving (barely) with style.

Whether you're printing for laughs, stress relief, or pure existential decoration, this one gets it.

Embrace the chaos. Print the fire. Ride it out.

3MF is included. This is one of the few instances where I had to adjust after painting, and the turtle is assembled and will not load properly unless you start a new project. Verify your flushing volumes and change your settings as needed.

The fire in the 3mf is set to 99% it should fit snug enough to pop in but not pop out. This all still depends on the type of filament you use.

Printing recommendations: .20 layer height Print in place, no support required 3 walls - 15% infill Allow the plate to cool before removing the prints

Slow Printer Acceleration for smoother prints - Half speed on the outer wall creates smoother prints.

Important Please Read: All Rebel Alicorn Designs are protected under Copyright Law. With your purchase, you are given the right to download and print the design for your personal use only. You do NOT have permission to resell, remix, or redistribute the digital files in any way. No alterations to the designs are permitted. Prints of the designs cannot be sold without permission. To sell the PRINTS of Rebel Alicorn Designs, you must obtain authorization by joining the “Legacy Merchant Tier or Merchant Tier” on Patreon, Thangs, or MMF.

More designs are coming soon! Check out my socials and give me a follow to keep up to date.

Warning: NOT suitable for unsupervised play by children or pets. Small parts can become a choking hazard if broken off due to rough play and broken 3D printed parts can create sharp edges. NOT recommended for children under 3