We can't have all of these little critters running around. Here's a cute little display for your little critters. **Critters are not included with the display. **

The pieces are flat so that you can glue them wherever you want or not glue them so that you can change out pieces as you like.

100% Display Shown will fit 100% Critters

I did 5% honeycomb infill on the bubbles and "glass" to see if it made a fun pattern.

Painted 3mf is included. Verify settings; what works for me may not necessarily be the correct setting for your printer. Verify flushing volumes. Make sure to start a new project.

Printing recommendations: Brim if needed for extra adhesion; you may want to add supports to the hideaway if your printer does not bridge well. .20 layer height Print in place, no support required 3 walls - 15% infill Allow the plate to cool before removing the prints Reduce acceleration and adjust overhang speeds as needed

Filaments: Protopasta - Moonstruck White Satin Protopasta - Dragon Fruit Smoothie Protopasta- Wonderblack Rainbow Glitter Protopasta - Tidal Turquoise Protopasta - Soda Green

Important Please Read: All Rebel Alicorn Designs are protected under Copyright Law. With your purchase, you are given the right to download and print the design for your personal use only. You do NOT have permission to resell, remix, or redistribute the digital files in any way. No alterations to the designs are permitted. Prints of the designs cannot be sold without permission. To sell the PRINTS of Rebel Alicorn Designs, you must obtain authorization by joining the “Legacy Merchant Tier or Merchant Tier” on Patreon, Thangs, or MMF.

More designs are coming soon! Check out my socials and give me a follow to keep up to date.

Warning: NOT suitable for unsupervised play by children or pets. Small parts can become a choking hazard if broken off due to rough play and broken 3D printed parts can create sharp edges. NOT recommended for children under 3.