This pair of glasses is an artistic representation of a spider with four legs hanging off each eye and webbing in a circle around both eyes.

The webbing is printed separately and glued into place with a few drops of super glue. This means you don't need a multi-color printer. and those who have one can save a lot of time and filament printing this design.

🚨🚨🚨🚨🚨🚨

This model is for personal use only. If you want to sell physical prints of our designs, or you want to support us, please SUBSCRIBE TO OUR THANGS MEMBERSHIP PLAN : https://than.gs/u/161490?plans=true

🚨🚨🚨🚨🚨🚨

Print Settings:

Layer Height: .16 or lower .1 would be best

Support: supports are built into the design and will be printed under the arms of the glasses. The supports and arms should break free with a light snap. If they do not, it is likely that you will need to reduce your layer height.

-Note there is a version included without the built-in supports for those who want it (it will require slicer supports) HalloweenWearable #HalloweenWearable