Project Print Lab
ProjectPrintLab88 followers
Follow
ProjectPrintLab
ProjectPrintLab
|
Image 1 of 5
Puck Stack Coozie with Pouch Puck 3d model
ProjectPrintLab
ProjectPrintLab
|
Image 1 of 5
Puck Stack Coozie with Pouch Puck 3d model
Puck Stack Coozie with Pouch Puck 3d model
Puck Stack Coozie with Pouch Puck 3d model
Puck Stack Coozie with Pouch Puck 3d model
Puck Stack Coozie with Pouch Puck 3d model
Puck Stack Coozie with Pouch Puck 3d model

Puck Stack Coozie with Pouch Puck

Subscribe for access starting at $10 USD
Get access to this model and 7+ more
This model is restricted by licensing terms. 

This hockey puck beverage coozie is perfect for any hockey fan that loves hitting the golf course. It resembles a stack of pucks, holds a 12oz. beverage, has a built-in nicotine pouch container and built-in magnetic ball marker.

Created by Course Coozie™ in conjunction with Project Print Lab

Recommended to print out of Polymaker HT-PLA to avoid any warpage from heat. The tolerance is perfect for a 12oz aluminum can.

Installation Instructions

  1. Press (12) 3x2mm magnets to the base of the coozie and the pouch puck to magnetically hold the base to the coozie
  2. Press (4) 10x3mm magnets into the Ball Marker* Base
  3. Press the Ball Marker Base into the bottom of the pouch puck
  4. Snap red bin slide into the base of the pouch puck

*Individual ball markers can be downloaded separately

Recommended Model for Magnet Install Use the 10x3 model.

Dimensions 4" Tall x 3" Wide

Required Parts (12) 3x2mm Magnets Cost ~$1.80 USD (4) 10x3mm Magnets Cost ~$0.70 USD


Discussions

Puck Stack Coozie with Pouch Puck

0 downloads · 2 months ago in  and 
Project Print Lab
ProjectPrintLab88 followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 7+ more
This model is restricted by licensing terms.