RC Car \ Truck VTX Backpack

VTX Backpack Bottom.stl

RC Truck Bumper

A buddy of mine kept having the issue where when he would flip his RC truck, it would end up eating away the lil spoiler off the back of the bed, so i made this bumper to cover that.  I used cut strips of VHB tape to hold it on and that seems to work really well.  Can easily be scaled up or down as needed, or chopped up in tinkercad.  I think his models were like 1\16th or there abouts. 

Rotor Riot CL1 XT60 Post Mount

CL1 XT60 Post Mount - for stock standoffs.stl

Sony HDR-AZ1 GoPro ND Filter Adapter

The GoPro ND filter holder side is from a model on thingiverse, I don't have the org link or I would post it, sorry :( I try to always give credit for the remix even if from elsewhere.  But anyway, this works well, cant tell in the camera there is any adapter on there. 

Toolkit RC M7 Charger Case w\XT60 to XT30 holder and without

ToolkitRC M7 Case TPU w XT60toXT30 Holer.stl

Squirt BetaFPV 900mhz T Antenna Mount

Needed a front mount for my BetaFPV ELRS 900mhz antenna, the skinny blue one, although BetaFPV has its rep in the industry these work really well, and the antenna from testing others have done, work very well.  Print 2 no mirroring needed.

Ikea Office Lamp Wall Mount

Got an neat yellow articulating arm Ikea lamp at good will, made this wall mount up, have been using it for about 3 months and its working well :D 

FPV \ Quad Wall Mount

Made this up as the need arose, I put the name of the quad I hang on it in Tinkercad, but here is a blank.  This one has worked for the CL1, Cinesplore, Squirt V2, Glide and Slattra frames, I do use TPU arm guards with the bottom "bumpers" so they sit up a bit anyway away from the wall, but easy peasy to load up in tinkercad, make a copy, and chop and group parts together to make it larger. 

Cinesplore SMA Standoff Mount.stl

Some parts that I have come up with for the FPVCycle Cinesplore

Cinesplore Underside Immortal T mount Antenna wire guide.stl

Cinesplore Underside Immortal T mount Antenna.stl

Cinesplore GPS Mount GPS-22

Cinesplore Back Stand.stl

Cinesplore Front Stand.stl

Taranis X9D Star Trek Gimbal Protector

Wanted a Star Trek gimbal protector for my X9D Plus, mine has red stick ends on it that i picked up somewhere and its a snug fit on those, but would be easy to load up into tinkercad and bore the hole out if needed. 

Taranis ST Gimbal Protector (2).stl

Bowden CTC Z Top Open Hole.stl

4020 fan slip 

5015 Strait Duct

WIP - 3.5 High Output Badge

REMIX - Villa Planter with Patio drain.stl

Star Wars Rebel Ikea Lamp Base.stl

Resizable Lithophone Frame

FlashForge Finder Lid Hinge V6.stl

AM8 Adjustable Z Top

NeoPixel 40LED Sheild Box Mount Top.stl

NeoPixel 40LED Sheild Box Mount

CTC Z Top Open Hole

Ender 3 Rear Electronics Right Side 4010 Blower

Window Lock.stl

Gamecube Switch Plate Port Holder v3.stl

Ender 2 SKR Plate Adapter v2.stl

Ender 3 Pro Rear Right Side 5015 Blower v6.stl

Semi Working WIP - FlashForge Finder Bed Tray V1.stl

Dry Box 35mm wood rod hanger.stl

WIP - GameCube Wall Mount v6.stl

Ender \ CR Adjustable Z Mount for Dual Z.stl

AM8 _ Creality Carriage V3.stl

Just a Dad, IT Guy, Trekkie, Droner, 3D Printer, Gamer and over all enjoy-er of technology and learning new things.  Always here to help ! 

Paul McDonald - McTECH DIY

Achievements

Seedling

Debutant