Steampunk Robot Book Box

This charming book box features a steampunk-inspired robot holding a delicate rose, surrounded by intricately sculpted gears and industrial accents. With a glowing heart at its center and a whimsical, vintage finish, it’s a perfect hideaway for treasures, trinkets, or journals.

Designed for both display and utility, this 3D printable piece makes an eye-catching decor item or heartfelt gift. The textured surface is perfect for dry brushing and weathered metallic finishes — bring your own artistic touch to life!

• 🔧 Hinged book-style box.
• 🎨 Ideal for painting and custom finishes
• 📦 Perfect as a storage box, secret stash, or unique gift
• 🖨️ Tested on Bambu Lab P1S in PLA MATT (support-free)

Material: High-quality PLA or PETG filament. I use Bambu PLA Matt.

Print Settings: Supports: None needed. Ignore any slicer warnings about supports. Infill: 5%-15% (can be reduced if desired). Print Orientation: Print in place, as shown in the images. Size: Do not resize. For custom sizing, please contact me.

Assembly Requirements: Magnets: Two 10mm x 2mm magnets are needed to secure the box and book cover. Glue: Apply glue to affix the magnets in the slots provided and glue the box to the bottom cover.

Book Box internal height 33mm.

Assembly Instructions: Paint First: Paint all parts before assembly for the best finish. Attach Magnets: Use super glue to secure the magnets in place. Glue the Box: Apply wood glue to attach the box to the bottom book cover. Secure with Tape: After gluing, close the lid and wrap the entire book with masking tape to hold it firmly while drying.

Allow to dry completely before handling.

I used black under coat and copper for the metallic finish.

Please Note: This model has only been tested on a Bambu Lab P1S. If you're experiencing any issues using a different printer, feel free to reach out.

🔹 Personal use only. 🔹 Commercial use is exclusive to members.