Demon Slayer Hanafuda Earrings
32ย downloadsย ยทย 9 months agoย ยทย # ๐ฎ Demon Slayer Hanafuda Earrings
Step into the world of **Demon Slayer** with these iconic **H
๐ฎ Demon Slayer Hanafuda Earrings
๐ ๏ธ Print Settings
๐ง Design Variations
๐ธ Assembly
๐ก Tips
๐ฅ Files Included
Step into the world of Demon Slayer with these iconic Hanafuda Earrings โ worn by Tanjiro Kamado in the anime.
These earrings are print-in-place, designed for a clean multicolor look straight off the bed.
No assembly required! Just add hooks, and youโre ready to cosplay or display.
๐ ๏ธ Print Settings
- Material: PLA (recommended)
- Layer Height: 0.20 mm
- Supports: Not needed
- Brim: Not needed
- Ironing: Enable top surface ironing for the smoothest finish
- Calibration Tip: Make sure your printer is well-calibrated for first-layer adhesion and flow so the layered colors look crisp.
๐ง Design Variations
Two versions are included:
- Flat Design โ sleek and smooth, ideal for crisp prints.
- Relief Design โ with a subtle raised surface for texture (barely noticeable, but gives depth if your printer handles detail well).
๐ธ Assembly
No assembly required! Simply add earring hooks to complete the look:
๐ก Tips
- Ironing top layers is highly recommended to get a flat, polished surface.
- Use high-contrast PLA colors (red, white, black, blue) for the most accurate anime effect.
- For cosplay durability, consider printing at 100% infill.
๐ฅ Files Included
- Flat Version
- Relief Version
Both are print-in-place, no extra steps required.
โ ๏ธ Disclaimer: Earring hooks are not included. You will need to purchase them separately (affiliate links above).
Demon Slayer Hanafuda Earrings
32ย downloadsย ยทย 9 months agoย inย ย andย


























