1x1x1 LU - Labelled - Magnetic - Simple Multibin Drawer
Use this Simple Drawer inside of Multibin Shells.
This drawer fits a 1x1x1-High Multibin Shell. The external dimensions are 43Wx43Hx49D mm. The internal dimensions are 41Wx36Hx45D mm.
To prevent the draw from falling out when being opened, use "Drawer Stopper - Outer Corner Pins".
Learn more about Simple Drawers at https://multiboard.io/knowledge-hub
Printing Guidelines:
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL.
For more information about printer settings, click here.
This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts to create the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io
1x1x1 LU - Labelled - Magnetic - Simple Multibin Drawer
MDO - Wall Support
MDO - Battery Drawer
MDO - Modular Desk & Wall Drawer Organizer
GEN2 Decor - Faceplates - Classic Pro Series
MDO - Drawer 4 compartments
MDO - Top Table 2x
Complete Toolbox Organization (116+ Labels) | Style D | R7Makers
MDO - Drawer 2 compartments
MDO - Top Table
Bambu Lab Filament Spool - Hex Snowflake
Festive Lamppost
Not so… XL Nutcracker, for smaller build plates
Stackable Crate (large)
Mini Nightstand Storage System.3mf
Nintendo switch cartridge Nightstand Insert
Mini Toolbox, Print in Place, No Supports, Milwaukee, Real, Miniature
GEN2 Tilt Drawer Pro - 115
Not Soo XL Santa
XL Nutcracker for larger build plates
What does this slide into?
A 1x1x1 multibin
Correct name would be "1x1x1 Shell": https://thangs.com/designer/Multiboard/3d-model/1x1x1%20-%20Topped%20Multipoint%20Rail%20-%20Multibin%20Shell-1127567
Would be amazing to have an option to have a transparent front, for those cases where seeing is better than labelling. Any ideas how one might solve that?
Cut the part out where the label should go and replace it with plexi.
Is it possible to create named tags or labels for the drawers? Is this something that is in the works?
yea i see that there is a label slot but im not sure i searched around but since this stuff is so new i couldent find any remixes
Looking for the .5 depth drawers. Not in any of the related models. Need a search index.
Somewhat delayed... but I was looking for the same thing so ended up remixing the 1x height bin and splitting a Multibin shell to hold it, see it here: https://thangs.com/designer/sillyfrog/3d-model/1x%280.5x2%29x1%20-%20split%20height%20-%20Multibin%20Shell-1382309
Exactly what I was looking for - Thank you VERY much.
Hmm we did not actually make .5 drawers as we could they were really inconvenient to use. Is there a particular situation that your are using them in so I can better understand your application?
I'm not the OP but I was also looking for 0.5 drawers as my hypothetical use case is to organize lots of very tiny screws, nuts, bolts, etc. The smallest drawer available would be comically large for some of those categories. But I also have larger hardware that will work perfectly with the various sizes of drawers. Essentially I'm envisioning this: https://www.harborfreight.com/40-bin-organizer-with-full-length-drawer-94375.html?gStoreCode=36&gQT=1 but modular and more variety of sizes.
It is entirely possible that this isn't the correct application for multibin drawers, which I think I'll find out once I start printing some 1x1x1s (have not actually done that yet).