1x1x0·5 CU - Angled USB-SD Holder - Multibin Insert
A combo holder for USB-A, USB-C, SD and Micro SD Cards.
"Multibin Inserts" are placed inside of Multibin Shells to create a "Multibin". Multibin Inserts give the Shell the functionality to hold/organize specific items.
Multibin Inserts can be secured to the Shell using 10x2 N52 Neodymium Disk Magnets that are held in place with "Bottom Magnet Holders".
Learn more about this part at https://multiboard.io/knowledge-hub
Printing Guidelines:
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
For more information about printer settings, click here.
This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io
1x1x0·5 CU - Angled USB-SD Holder - Multibin Insert
Ori - A Modern Ribbed Accent Lamp
Classic Decorative Pull Handle
Packout Grinder Insert.stl
FlexiDesk Vertical Modular Organizer
Cosmo Pendant
Dastardly Dovetail Box (Large)
Not So XL Easter Bunny - for smaller build plates
XL Easter Bunny - for larger build plates
Not So XL Highland cow (sitting)
XL Highland Cow (sitting)
Foldable Robby the robot-SD
Build-a-Gnome Mechanic Add-On STL Bundle – Baseball Cap, Tire, Oil Can and Wrench
Zombie Dragon Bust
Goku - Dragon Ball Z - Fan Art
Shark Desk Org/ Trash Can (+Bambu 3mf)
Voronoi Vertebrae (cervical)
Wall Mountable Slimer!
.gif&w=3840&q=75)
Articulated Dragon Pyrrhus
Log Fire Lamp
Why is it so dang hard to figure out how these items attach to the tiles? Why is it so dang hard to find parts that work together? This has grown very frustrating.
The insert fits into a bin, the bin then attaches to the tiles using multipoint connectors connected to snaps. Or at least that's what I've gathered so far.
This insert also mounts directly onto a multiboard with a multipoint connector.