12.5 mm - Single Snap (DS Part A) - Small Command Strip Mount

510 downloads · 1 year ago · This is a "Small" Command Strip Mount that's best suited for Multiboard Tiles that are smaller than

This model is restricted by licensing terms.

View license.

Description

This is a "Small" Command Strip Mount that's best suited for Multiboard Tiles that are smaller than a 6x6. They work best with 3M Small Picture Hanging Command Strips and create a 12.5 mm offset from the surface.

If your Tiles are a 6x6 or bigger, then use the Medium Command Strip Mounts.

This is a "Part A" piece, and attaches to two Part B Snaps.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and not supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, click here.

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io

Tags:

Discussions

googelstevejobs9 months ago

another small issue: the snap removal tool cannot apply its grip into these, so you'll have to break the DS part B off instead. (sometimes wiggling them out with a box cutter works, sometimes it doesn't. Print a few spares.)

googelstevejobs11 months ago

These are fantastically useful, BUT there is one nasty pitfall because title and description are wrong: they do NOT create a 12.5mm offset to the wall - it's closer to 8.5mm, maybe 9 if you include the command strip and some tolerance. As a consequence there are (as far as I can tell) NO vanilla offset snaps that create a matching distance to the wall. I have solved this by adding the snaps I want to the same slicer plate and moving them downwards (through the plate) until the height seemed roughly right. The same problem exists with the 6.25mm command strip mounts also as well, too.