This is a "Medium" Command Strip Mount that works best with 3M Medium Picture Hanging Command Strips and creates a 12.5mm offset from the surface.

If your Tiles are smaller than a 6x6, then use the Small Command Strip Mounts.

This is a "Part A" piece and attaches to two Part B Snaps.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and not supports. Apart from that, use yourprinter'ss default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, click here.

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io