Iron Man Mark 85

1.1K downloads · 5 years ago · Wearable Iron Man Mark 85 Helmet The jaw is removable and there are cutouts where you can put magne

Description

Wearable Iron Man Mark 85 Helmet

The jaw is removable and there are cutouts where you can put magnets in both the jaw and the helmet for a better fit.

STL-files for 3D-printing.

Scaled to size.

STEP file included.

Check out my other models at: https://thangs.com/mattias.hellberg.95

Discussions

96950482 years ago

SOOOOOOOOOOOOOOO cool!

owendurand20103 years ago

I think that there is a line though the middle of the face plate

josephzamani253 years ago

how does the faceplate connect to the head part

bltsmm4 years ago

I have attempted printing this 6 or 7 times now using Cura Slicer on my Creality CR10S Pro V2 and have not had any success. I'm not sure if it's the file or the slicer but my printer jams every single time I attempt it. I have since printed someone else's rendition and it printed fine. I was disappointed because this one looks great. I will attempt it again at some point but just letting you know if you are using Cura, beware.

joe.basham.ii4 years ago

I had mine in Cura want to put a high layer, I think it was 509 on the build plate.(so if I let it print it would of drove the nozzle to the bed and probably do bad things!) All I did was reload the file in Cura and it went away I would go back and look at your preview and see if it had a funky layer like mine. Getting ready to print mine on a FLSUN SR. Good luck with your print!

Mattias Hellberg4 years ago

okay thank you for the information. where in the print does it fail? I can check the file for errors