Scorcher is an ode to our one beautiful sun and its radiating energy that feeds all life on Earth. The intensity is both glorious and intimidating.

--

Printing Guidelines

While there are a few pre-scaled sizes included in the download, this artwork can be printed at nearly any size. Simply import one of the files into your slicer and do a uniform scale to your desired size. Then turn off uniform scale and scale the Z dimension back to 1.2mm (minimum). You can use a larger Z height if you want a thicker poster, which may be useful for very large sizes. For example I used a 1.6 mm height for a 600mm tall version (still quite wobbly!).

At the default 1.2mm Z height, split the model or do a filament swap at Z:0.6mm.

Generally 0.16mm layer height works well, but you may get a smoother result with lower layer height.

You can use UHU Putty to mount smaller sizes, or acrylic double-sided tape for larger prints. Add a backing or frame for extra style points! Using a neon filament for the backing color makes for an amazing blacklight poster.

--

Photographed models were printed using Elegoo Rapid PLA+ Black and White, along with Panchroma Neon Yellow PLA (Amazon) which glows brilliantly under a UV black light!

The 300mm version was printed on the Qidi Plus4 3D Printer (Also on Amazon). The 600mm version was printed on the Elegoo Orangestorm Giga.