More sculpture than anything, this cascading bowl vanishes when viewed from just the right angle! The PERSPEKTIVA series is derived from my CORRUGA prints, except the walls are now angled to cancel out perspective convergence to dissapear even more! There are some steep overhangs but a well tuned printer and good filament makes it work. (This particular piece has slightly less angled walls that the other prints in the series, so it will produce more of a shimmering effect. To capture the perfect alignment on camera you may need to step back and zoom in to decrease the field of view).

Printing Guidelines

Print solid without supports using a 0.4mm nozzle. 0.12mm layer height for cleaner overhangs, or 0.16mm to save time. NO SUPPORTS. This small cube is 50mm x 50mm x 50mm. 'Arachne' slicing method may produce a cleaner part, but it is also likely to crash your program! In that case 'Classic' slicing is still acceptable.

These prints involve a ton of retraction, so make sure you've got your settings dialed in for the best results!

Photographed model was printed on the Bambu Lab X1-Carbon 3D Printer using Bambu Lab PLA Basic Bambu Green.**

*These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!