This playful drip tray immitates a cartoonish puddle, while preventing real spills while watering your indoor plants! The hollow shape catches runoff from pots, which stand upon shallow supports for a subtle floating effect (and airflow).

This version has a roughly 190mm base. and is 25mm tall, with a 120mm diameter hole to catch plenty of runoff and preventing root rot.

The pots shown in photos are for reference, not included in this download.

Printing Guide

• This print has some bridging, but nothing that a decent printer can't handle using default settings. No supports.
• If well-tuned, you can get an extra clean surface with 'Ironing' enabled in your slicer on the top half of the model for an extra clean appearance (without unecessarily ironing the internal surfaces)

Related Models

• Chunky Puddle 140mm
• Chunky Puddle 100mm
• Pufft Planter

Photographed model was printed on the QIDI X-Plus4 3D Printer (Also on Amazon) using 3DJake Eco PLA *

These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!.