This stunning square bowl can appear both very solid or almost ethereal depending on the viewing angle. There are some steep overhangs but a well tuned printer and good filament makes it work!

Printing Guidelines

Print solid without supports using a 0.4mm nozzle to ensure that each wall is exactly 2 shells. 0.12mm layer height for cleaner overhangs, or 0.16mm to save time.This large bowl is 227mm x 227mm x 145.35mm, just fitting on the BambuLab X1/P1 build surface. 'Classic' wall generator works well and 'Arachne' may crash your Slicer on this demanding model..

3 Versions are included. 'Bottom Edge' has a bottom outline to help with bed adhesion. 'Dual Edge' includes both a bottom and top outline to improve part strength. 'No Edge' is the most challenging to print and has delicate top edges, but includes only the corrugated lattice (as photographed).

Find the smaller CORRUGA Dish here.

Photographed model was printed on the Bambu Lab X1-Carbon 3D Printer using Bambu Lab PLA Silk Dual Color (Blue Hawaii).* *These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!