DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
Bundle
Search in
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
Bundle
Search in
Brian H
LoftedGoods27K followers
Follow
LoftedGoods
LoftedGoods
|
Image 1 of 2
Tilt Lamp - Small 3d model
LoftedGoods
LoftedGoods
|
Image 1 of 2
Tilt Lamp - Small 3d model
Tilt Lamp - Small 3d model
Tilt Lamp - Small 3d model

Tilt Lamp - Small

1.3K downloads · 3 years ago · A smaller version of the Tilt Lamp! This size is great for bedside tables or bookcases and should f
This model is restricted by licensing terms. 
View license.
Description

A smaller version of the Tilt Lamp!

This size is great for bedside tables or bookcases and should fit on smaller printer beds.

Dimensions:

Base - 4.5"w x 5.25"h

Shade - 7"w x 6"h

Two important notes that are in the original post but I'll reiterate them here:

  1. I highly recommend printing the shade using a concentric infill pattern. This will hide the infill when the light shines through it.

  2. Note that you must only use LED bulbs (9 watts max) as traditional bulbs can get pretty hot and could cause damage to the plastic. I like these multi color smart bulbs that I can control with my phone, but any standard 9W LED bulb will do.

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

Tags:

Community Makes (4)
Black Walnut Base & Matte Ivory White Shade. Thanks for this design Brian!
Printed in Elegoo Wood PLA and Overture Matte White. I used a 0.4mm nozzle at 0.16mm layer heights for the base and a 0.6mm nozzle at 0.18mm layer heights + 1.2mm line widths for the shade, which was in lamp mode. I considered printing the base upside down to avoid supports, but decided against it since most of the weight would be in the air. I use Aliexpress cords for all of my lamps and they unfortunately do not have a section that helps to lock against the lip. I modified an E27 collar from Printables to act as a collar to secure the light bulb. I then just used a soft white LED bulb
Looks fantastic - there were some stringing failures on the shade but those are all kept to one side so I can keep those to the back.
Loved making this for my daughter’s bedroom.
Black Walnut Base & Matte Ivory White Shade. Thanks for this design Brian!
Printed in Elegoo Wood PLA and Overture Matte White. I used a 0.4mm nozzle at 0.16mm layer heights for the base and a 0.6mm nozzle at 0.18mm layer heights + 1.2mm line widths for the shade, which was in lamp mode. I considered printing the base upside down to avoid supports, but decided against it since most of the weight would be in the air. I use Aliexpress cords for all of my lamps and they unfortunately do not have a section that helps to lock against the lip. I modified an E27 collar from Printables to act as a collar to secure the light bulb. I then just used a soft white LED bulb
Looks fantastic - there were some stringing failures on the shade but those are all kept to one side so I can keep those to the back.
Loved making this for my daughter’s bedroom.
Community Makes (4)
Black Walnut Base & Matte Ivory White Shade. Thanks for this design Brian!
Printed in Elegoo Wood PLA and Overture Matte White. I used a 0.4mm nozzle at 0.16mm layer heights for the base and a 0.6mm nozzle at 0.18mm layer heights + 1.2mm line widths for the shade, which was in lamp mode. I considered printing the base upside down to avoid supports, but decided against it since most of the weight would be in the air. I use Aliexpress cords for all of my lamps and they unfortunately do not have a section that helps to lock against the lip. I modified an E27 collar from Printables to act as a collar to secure the light bulb. I then just used a soft white LED bulb
Looks fantastic - there were some stringing failures on the shade but those are all kept to one side so I can keep those to the back.
Loved making this for my daughter’s bedroom.
Black Walnut Base & Matte Ivory White Shade. Thanks for this design Brian!
Printed in Elegoo Wood PLA and Overture Matte White. I used a 0.4mm nozzle at 0.16mm layer heights for the base and a 0.6mm nozzle at 0.18mm layer heights + 1.2mm line widths for the shade, which was in lamp mode. I considered printing the base upside down to avoid supports, but decided against it since most of the weight would be in the air. I use Aliexpress cords for all of my lamps and they unfortunately do not have a section that helps to lock against the lip. I modified an E27 collar from Printables to act as a collar to secure the light bulb. I then just used a soft white LED bulb
Looks fantastic - there were some stringing failures on the shade but those are all kept to one side so I can keep those to the back.
Loved making this for my daughter’s bedroom.
Discussions
C
cianmm2 years ago
Looks fantastic - there were some stringing failures on the shade but those are all kept to one side so I can keep those to the back.
Looks fantastic - there were some stringing failures on the shade but those are all kept to one side so I can keep those to the back. 3d model
Layer height0.2 mm
Infill density15 %
SupportsTree
A
a11kns2 years ago
Loved making this for my daughter’s bedroom.
Loved making this for my daughter’s bedroom. 3d model
Illuminates so beautifully 3d model
Luke N
lnorth08052 years ago

That looks amazing! May I ask what filament and settings you used? I love the darker shade.

yuzuki s
yuzuki studios2 months ago
Black Walnut Base & Matte Ivory White Shade. Thanks for this design Brian!
Black Walnut Base & Matte Ivory White Shade. Thanks for this design Brian! 3d model
C
Crocodonkey2 years ago
Printed in Elegoo Wood PLA and Overture Matte White. I used a 0.4mm nozzle at 0.16mm layer heights for the base and a 0.6mm nozzle at 0.18mm layer heights + 1.2mm line widths for the shade, which was in lamp mode. I considered printing the base upside down to avoid supports, but decided against it since most of the weight would be in the air. I use Aliexpress cords for all of my lamps and they unfortunately do not have a section that helps to lock against the lip. I modified an E27 collar from Printables to act as a collar to secure the light bulb. I then just used a soft white LED bulb
Printed in Elegoo Wood PLA and Overture Matte White. I used a 0.4mm nozzle at 0.16mm layer heights for the base and a 0.6mm nozzle at 0.18mm layer heights + 1.2mm line widths for the shade, which was in lamp mode. I considered printing the base upside down to avoid supports, but decided against it since most of the weight would be in the air. I use Aliexpress cords for all of my lamps and they unfortunately do not have a section that helps to lock against the lip. I modified an E27 collar from Printables to act as a collar to secure the light bulb. I then just used a soft white LED bulb 3d model
3d model
PrinterBambu Lab A1
MaterialPLA
P
pmperry2 years ago

What light cord did you use for this?

S
Shylock60312 years ago

Did you ever find out? I cant get the one I have to fit enough so I can get the ring on.

BM
Bruno Miranda2 years ago

see below.

BM
Bruno Miranda2 years ago

here you go... https://www.amazon.com/dp/B0CHHVSLQ1?_encoding=UTF8&psc=1&ref_=cm_sw_r_cp_ud_dp_MMW1X26H7PSQ71EVCJ4H

Jason P
Yoopergeek2 years ago

These do not work -- not without modification. The threaded portion fits into the lamp body, but the flange covering the bottom of the threaded section is too wide to fit into the neck of the lamp, preventing the threads from coming out the top far enough to affix the shade.

Mihael K
mihaelkro2 years ago

I have the same problem, did you solve it and how?

C
cianmm2 years ago

I solved it by removing the flange - I was able to unscrew a little "nozzle" which kept it on.

E
egrims1 year ago

Probably not needed now but in case it helps somebody else here's a link to a model I made to help with this. I ran into the same issue and wanted to turn down the diameter of the light fixture portion. So I made this adapter that will thread into the light socket thread in the fixture after you unscrew it. Then you can put it in a drill and sand down the outer diameter nice and cleanly. Hope it helps someone!

https://thangs.com/designer/egrims/3d-model/1267562

Sebastian M
sebastian.munoz.arriaza6 months ago

What are the specific components on Amazon that I should get to assemble this lamp?

CB
tri-d2 years ago

@hendricksdesign I love your design! Immediatly needed to join the membership because of the lamp. I by the way also love the Filament you used for the small lamps body. Can you tell me what brand and colour this is? Would be happy about it!

best regards from Germany

Tilt Lamp - Small

1.3K downloads · 3 years ago in 
Lamps & Lighting
 and 
Home Decor & Accessories
Brian H
LoftedGoods27K followers
Follow
This model is restricted by licensing terms. 
View license.

More models

elden.designs
elden.designs
Small Table/Bedside Lamp - Pisa 3d model

Small Table/Bedside Lamp - Pisa

elden.designs
elden.designs
Small Table/Bedside Lamp - Brisa 3d model

Small Table/Bedside Lamp - Brisa

Noctura Luxe
Noctura Luxe
Vekt - Small Minimalist Lamp 3d model

Vekt - Small Minimalist Lamp

elden.designs
elden.designs
Small Table/Bedside Lamp - Pothos 3d model

Small Table/Bedside Lamp - Pothos

elden.designs
elden.designs
Small Table/Bedside Lamp - Iris 3d model

Small Table/Bedside Lamp - Iris

elden.designs
elden.designs
Hexa - Small Table/Bedside Lamp 3d model

Hexa - Small Table/Bedside Lamp

elden.designs
elden.designs
Aquarius - Small Table/Bedside Lamp 3d model

Aquarius - Small Table/Bedside Lamp

elden.designs
elden.designs
Fuoco - Small Table/Bedside Lamp 3d model

Fuoco - Small Table/Bedside Lamp

elden.designs
elden.designs
Cronus - Small Table/Bedside Lamp 3d model

Cronus - Small Table/Bedside Lamp

elden.designs
elden.designs
Small Table/Bedside Lamp - Halcyra 3d model

Small Table/Bedside Lamp - Halcyra

elden.designs
elden.designs
Japandi - Small Table/Bedside Lamp 3d model

Japandi - Small Table/Bedside Lamp

elden.designs
elden.designs
Linea - Small Table/Bedside Lamp 3d model

Linea - Small Table/Bedside Lamp

elden.designs
elden.designs
Small Table/Bedside Lamp - Cubea 3d model

Small Table/Bedside Lamp - Cubea

elden.designs
elden.designs
Small Table/Bedside Lamp - Martini 3d model

Small Table/Bedside Lamp - Martini

elden.designs
elden.designs
Small Table/Bedside Lamp - Melia 3d model

Small Table/Bedside Lamp - Melia

elden.designs
elden.designs
Sienna - Small Table/Bedside Lamp 3d model

Sienna - Small Table/Bedside Lamp

elden.designs
elden.designs
Aries - Small Table/Bedside Lamp 3d model

Aries - Small Table/Bedside Lamp

elden.designs
elden.designs
Small Table/Bedside Lamp -Aureo 3d model

Small Table/Bedside Lamp -Aureo

elden.designs
elden.designs
Pisces - Small Table/Bedside Lamp 3d model

Pisces - Small Table/Bedside Lamp

elden.designs
elden.designs
Leora - Small Table/Bedside Lamp 3d model

Leora - Small Table/Bedside Lamp