This is an attachment for The Horizontal Rail. The full required system can be downloaded below: Horizontal Rail

Sunglasses holder that attaches to the Horizontal Rail system.

Two sizes are included in the 3mf. The large size attaches using two dovetails and the smaller size uses one dovetail. Since the small size only uses one dovetail, it can also be used on the vertical version of The Rail.

Supports None needed!

Scaling These can not be scaled as they are designed to fit the sliding dovetail system for The Horizontal Rail.

Orientation

• Both sizes print flat with their bottoms on the buildplate

Print Settings

• .2mm layer height
• 15% grid infill
• 2 walls

Filament

Bambu Lab Matte PLA

Colors I used:

• Charcoal

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods