A highly requested square planter that is compatible with The Vertical Rail, The Horizontal Rail, The Tripod Rail, and my original command strip wall mount.

Previous versions of this style of planter required an inner pot that nested into the outer pot. In order to save time and filament, I've updated the pot to have a small drainage tray that is inserted into the bottom of the pot.

Supports A very small amount of tree supports are recommended for the flat part of the dovetail on the back of the planter.

Scaling I wouldn't recommend scaling the dovetail mounted versions since they are meant to fit with my universal dovetail system. The tabletop versions can be scaled however you like.

Orientation

• Everything prints upright with its bottom on the build plate
• The wall mount prints flat with the sliding dovetail facing up

Print Settings

• .2mm layer height
• 15% grid infill | 15% gyroid infill for wall mount
• 2 walls
• Set bridge flow to 1.6 for drip tray and wall mount

Filament

Bambu Lab Matte PLA

Colors I used:

• Terracotta

Hardware

• #10 - #12 x 1-1/4" screws and anchors
• 3M Medium Picture Hanging Command Strips

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods