Another planter with a hidden, twist off drip tray! Two sizes available (2.75" and 4.5") and two variations for each size (wall mounted or tabletop).

Supports None needed!

Scaling I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.

Orientation The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up.

Print Settings .2mm layer height 15% grid infill 2 walls

Filament & Hardware Filament:

• Overture Matte Light Brown PLA Hardware:
• Command Medium Picture Hanging Strips
• #10-12 x 1-1/4 in anchors and screws

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/