Mini Mag Vase No. 3

759 downloads · 2 years ago · Another mini magnetic vase! This one has a smooth outer surface and prints super fast. Magnets on th

This model is restricted by licensing terms.

View license.

Description

Another mini magnetic vase! This one has a smooth outer surface and prints super fast. Magnets on the back allow you to stick it to your fridge or any magnetic surface.

Supports None needed!

Scaling This one should not be scaled since the holes on the back are sized to fit 10x2.3mm magnets.

Orientation The vase should print right side up.

Print Settings .2mm layer height 15% grid infill 2 walls Wall/infill print order - outer/inner/infill

Filament & Hardware Filament I used for this print: Overture Matte Light Brown PLA Magnets: 10x2.3mm Small Round Fridge Magnets

Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/

Tags:

Discussions

3D Printing Berlin2 years ago

Vase No.1 & No.2 also have a version with 10x2mm magnet, it would be great if you could do the same for the Monstera leaf and vase No.3 and for future magnets in general.

kabelfritt2 years ago

Why is the STL hollow?? The print failed four times before I noticed. Love your work but are all you STL not 100%. Or different from the 3mf file. Don't want to waste pla or in thangs if the files are different, I am missing something ?