Classic Planter with Drip Tray and Stand

2.1K downloads · 3 years ago · A mini version of a classic mid century plant stand. Prints fast with no supports. 4 sizes included:

This model is restricted by licensing terms.

View license.

Description

A mini version of a classic mid century plant stand. Prints fast with no supports. 4 sizes included: 1.25". 2.5" 4.5", and 6.5"

Tags:

Discussions

valanidesn2 years ago

I printed the above but I am getting noticeable layer lines at the bottom of each part. any suggestions?

dcktp372 years ago

I had the same issue. He’s addressed this in a video on instagram and is supposed to be updating models to help lessen the shrinkage due to differences in layer time.

niels.hamelryck2 years ago

Hi, For this pot I have issues with the legs. When printed in Matte I have the upper side neat, but the bottom, first layers are more "sparkly". Is this due to the PEI plate? Any idea how I can make both sides matte?

dcktp372 years ago

It takes some trial and error, but, printing upright with support will yield the best appearance.

jwaz922 years ago

I just finished printing the 6.5, .2mm with 15% infill on everything. The planter itself turned out great, but the legs are where I am having issues - they are pretty flimsy and won't lay flat. It isn't a very snug fit for the planter into the stand either, but I feel like that issue is amplified by the legs not being able to lay flat. Any suggestions would be appreciated!