Title says it all. Modeled for a Stanley 0-10-810 Quick Slide utility knife. The upper compartment is enlarged in case you want to use it with a different brand of utility knife. Check dimensions before printing if using a different type/brand of utility knife.

The lower compartment is for Stanley replacement blades:

https://www.amazon.com/Stanley-2-11-921-Knife-No-1992-Silver/dp/B0001IWB0I/ref=sr_1_1?crid=X1DX4J7CRDS0&dib=eyJ2IjoiMSJ9.kM2y2clXj-kDk470DS39Gg.rmMZxqiYPqWD6c1NFuuT3OuIVY2Zj495OkooAFB58do&dib_tag=se&keywords=stanley%2BB0001IWB0I&qid=1767694151&sprefix=stanley%2Bb0001iwb0i%2Caps%2C220&sr=8-1&th=1

The model is a VERY SNUG FIT to make it difficult for little fingers to open the case. Therefore it is necessary to have your settings dialed in and use dry, rigid filament. I use 3 walls with 50% triangular infill with PLA+ dried to 10% - 14% moisture. Remix to your heart's desire.

Dry your filament, eat your vegetables, don't do drugs.