Toss them in, watch them sink, and let the kids dive for the whole crew — five colorful sea critters and a shiny pearl that drop to the bottom of the pool or tub. When playtime's over, everything snaps magnetically into a print-in-place clamshell case that goes anywhere.

😊 Why You'll Love It: • 🌊 Sink-and-seek play — they drop to the bottom for proper dive-and-retrieve fun • 🐠 A whole crew — pufferfish, seahorse, octopus, crab, turtle, and a pearl • 🐚 All-in-one storage — the magnetic clamshell holds the crew and travels anywhere • ✨ Doubles as decor — the insert is glued in last, so leave it out and use the shell as a trinket dish or display piece • 🎁 Great gift — colorful, water-ready fun for little ones

📐 Quick Specs: 5 sea creatures + 1 pearl • everything stores inside the magnetic clamshell • prints on a standard 180 mm bed (Bambu Lab A1)

💡 Tip for kids: If this is a toy, leave the 4 lid magnets out to start. After a weekend playing with our nieces we found wet little hands struggle a bit to pop a magnetised shell open — and you can always glue the magnets in later if you decide you want a firmer close.

🎨 Filament Used: Silk White (Get it) • Hot Pink (Get it) • Grass Green (Get it) • Mandarin Orange (Get it) • Citrus Yellow (Get it) • Turquoise (Get it) • White eyes (Get it) • Black pupils (Get it)

🛠️ Hardware Used: • Magnet 5×3 mm (×12 for pals + insert, plus 4 optional for the lid): Get it

Estimated Print Time & Material Usage (Bambu Lab A1):

• 🐠 Animals only: ~4 h 56 min / ~85 g
• Full set total: ~17 h 29 min / ~357 g

Approximate — varies by printer and slicer settings.

📋 Print Settings: See included README.md for detailed instructions

☀️ PLA or ASA? PLA is perfect for pool and bath play — the white shell reflects sun and the animals stay underwater where it's cool (warp-free through a full day at ~32C / 89F in our testing). For sets left baking in direct sun, print in ASA for better heat and UV resistance.