Pigeon flexi and Post box
Pigeon flexi clip -Youtube shorts
✨Pigeon Flexi✨
3 walls, 15% gyroid or 3D honeycomb infill. No supports.
Tested down to 50%, I don't recommend going below 70% scale. The smallest pigeons in the pictures are 70%, the largest ones are 150%
Editing 3MF
Avoid using the slicer's fill tool when coloring the eyes and eye shines in the 3MF files, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner.
The eye shines can be deleted by holding alt and clicking on them in prepare tab, then right clicking and choosing delete from the drop down.
✨Post box✨
3 walls, 15% gyroid or 3D honeycomb infill. No supports. Prints in 3 parts - post box, bench, and base Use Arachne wall generator (bambu studio or similar slicers) Tested down to 70%
⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐ + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available from my profile page - Click here📌























.png&w=3840&q=75)








