🐌 Ghosty snails 🐌

• 3 walls, 15% gyroid or 3D honeycomb infill, No supports

• As this is a sculpt the scale is completely flexible. If you are going to print them very small I recommend using smaller layer height like 0.12

Editing 3MF

• Avoid using the slicer's fill tool when coloring eyes, and cheeks in the combined 3MF file, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner. Do not split to objects. 



• Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.

Grassy Organizers

• 3 walls, 15% gyroid or 3D honeycomb infill, No supports

• 100% box fits 100% snail

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐ + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - Click here📌