🌸 Cherry blossom Pixie 🌸

• 3 walls, 15% gyroid or 3D honeycomb infill. No supports.
• Tested up to 250%, I don't recommend going below 100%
• Please use Brims with a brim gap of 0.3 if you are using Textured PEI plate, especially so if its a multi color plate. A little bit of post printing clean up is better than losing the plate due to adhesion issues.
• Pixie can be mirrored in the slicer to have the branch on different sides, to mirror simply right click and then select "Mirror - Mirror x axis"

Editing 3MF

• Avoid using the slicer's fill tool when coloring the eyes and eye shines in the 3MF files, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner. Do not split to objects.


• The eye shines can be deleted by holding alt and clicking on them in prepare tab, then right clicking and choosing delete from the drop down.
• Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.

✨ Dice Stand ✨

• 3 walls, 15% 3D honeycomb infill, No supports.
• At 100% dice will fit an 100% pixie with lots of spare room. The dice and pixie in the main picture is 115% for the dice stand and 200% for the pixie
• 100% dice stand will fit standard dice comfortably. 115% dice stand will fit larger resin dice.

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
 + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available from my profile page - Click here📌