INDIRECT SHAPES
INDIRECT SHAPES2.4K followers
Follow
INDIRECT SHAPES
INDIRECT SHAPES
|
Image 1 of 7
Vase 3d model
INDIRECT SHAPES
INDIRECT SHAPES
|
Image 1 of 7
Vase 3d model
Vase 3d model
Vase 3d model
Vase 3d model
Vase 3d model
Vase 3d model
Vase 3d model
Vase 3d model

Vase

Subscribe for access starting at $7.50 USD
Get access to this model and 107+ more
This model is restricted by licensing terms. 

Decorative vase for dried flowers. That organic design plays beautifully with light, making any space more attractive.

The model is available under a Private Use License. To unlock commercial rights, you need to be an active subscriber to a membership plan.

Print settings

Line width: 0.6 Layer height: 0.32 Wall line count: 3 Bottom layers: 5 Top layers: 0 Infill: 0 Supports: No

You can also try vase mode.

Community Makes (1)
First print of this model was with a metallic bronze filament, which was much too dark for this model. Panchroma mat Wood Brown was perfect, as you suggested.   
To my eye it needs a little more mass in the top layers to avoid the thin looking top of the model. Still love it as it is!
First print of this model was with a metallic bronze filament, which was much too dark for this model. Panchroma mat Wood Brown was perfect, as you suggested.   
To my eye it needs a little more mass in the top layers to avoid the thin looking top of the model. Still love it as it is!


Community Makes (1)
First print of this model was with a metallic bronze filament, which was much too dark for this model. Panchroma mat Wood Brown was perfect, as you suggested.   
To my eye it needs a little more mass in the top layers to avoid the thin looking top of the model. Still love it as it is!
First print of this model was with a metallic bronze filament, which was much too dark for this model. Panchroma mat Wood Brown was perfect, as you suggested.   
To my eye it needs a little more mass in the top layers to avoid the thin looking top of the model. Still love it as it is!

Discussions
Anthony K
tony906532678
First print of this model was with a metallic bronze filament, which was much too dark for this model. Panchroma mat Wood Brown was perfect, as you suggested. To my eye it needs a little more mass in the top layers to avoid the thin looking top of the model. Still love it as it is!
First print of this model was with a metallic bronze filament, which was much too dark for this model. Panchroma mat Wood Brown was perfect, as you suggested.   
To my eye it needs a little more mass in the top layers to avoid the thin looking top of the model. Still love it as it is! 3d model
 3d model
 3d model
PrinterOther
Printer modelEleg Centauri Carbon
Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm
MaterialPLA
Layer height0.2 mm

Vase

38 downloads · 1 year ago in  and 
INDIRECT SHAPES
INDIRECT SHAPES2.4K followers
Follow
Subscribe for access starting at $7.50 USD
Get access to this model and 107+ more
This model is restricted by licensing terms.