Welcome to the sculpted edition of our brand new Display Collection at Holoprops.

Where the Switch Frame Classic focuses on clean simplicity, the Runestone Frame is all about art, texture, and visual impact - the things we love here!

This premium version features three fully hand-sculpted variants, each one completely unique, inspired by ancient runic stone designs. These frames turn your Switch game cases into true fantasy-inspired display pieces.

Compatible with Nintendo Switch 1 and Switch 2 game cases.

If you want your favorite game to look like a legendary artifact on your wall, this is it.

🗿 Three Unique Hand-Sculpted Variants Each Runestone Frame includes:

• 3 fully sculpted stone variants
• Each one is 3D sculpted from scratch
• No procedural textures, no shortcuts
• Every surface is designed for maximum depth, shadows, and realism

All designs are 100% original Holoprops creations. You can also print them in: Single color Or Dual Color version for extra contrast and detail

🧲 Magnetic Wall System - Fully Compatible With the Display Collection The Runestone Frame for Switch uses the exact same Wall Mount system as the Classic Frame.

That means: ✅ Full compatibility with all current and future Display Collection products Wall installation remains identical:

• Uses 2 screws
• Drywall requires anchors
• Wood studs can use wood screws
• A drilling template is included so everything stays perfectly aligned and leveled

Inside the Wall Mount, you will glue 2 standard round magnets: 10 mm x 3 mm.

⚠️ VERY IMPORTANT, PLEASE, READ

Both magnets inside the Wall Mount must be glued with the same polarity and always in the same direction on every mount you install. The two rear magnets of the frame must always be installed with matching polarity to work correctly with the Wall Mount. The same rule applies to the badge system: glue the corner magnet with the same polarity and in the same direction on every frame, and always match that polarity when installing the magnet inside your badge or accessory. This simple rule is what makes the whole system work perfectly, so you can swap your frames instantly, anywhere, anytime.

🧲 Magnets Inside the Frame + Badge System Each Runestone Frame includes:

• 2 rear magnets for wall mounting
• 1 extra corner magnet for upcoming badges and decorative accessories from the Display Collection

All magnets across the entire Display Collection are always the same size: 10 mm x 3 mm. We strongly recommend buying a large pack of magnets so you are fully set for everything coming next.

Magnets are glued with:

• A small drop of super glue
• Press firmly into place
• Let the glue fully cure before mounting
• On our side, we use a super glue accelerator so the bond sets in just a few seconds.

⚠️ Again, polarity matters

If the polarity is wrong, the frame or future badges will not attach correctly.

🖐️ Easy Removal From the Wall Removing the Runestone Frame is just as easy: Grab it from the bottom Gently pull it toward you ➡️ It naturally detaches from the magnets without force

🖨️ Optimized Printing and Premium Finish All three sculpted variants are printed at a 35-degree angle for the cleanest surface possible and to minimize visible layer lines.

The included 3MF files are fully pre-configured, with: Optimized supports Strategic orientation Clean surface preservation Easy support removal Strong but material-efficient settings

These files have been tested more than twenty times to ensure reliability, surface quality, and structural strength. We spent days inside Bambu Studio documentation and dozens of real-world print tests to dial this in perfectly. So please, use the 3MF files provided. Each frame prints in about 3 hours, depending on filament and speed.

For best results, we always recommend: A clean build plate, washed with warm water and mild dish soap, air-dried A fully functional printer with a not-too-old plate or nozzle And using our 3MF files exactly as provided This ensures perfect adhesion and the cleanest possible sculpted finish.

🎯 Perfect Fit for Switch 1 and Switch 2 Game Cases We carefully engineered the internal fit so that:

Both Switch 1 and Switch 2 cases fit perfectly The cases slide in easily And nothing gets damaged or scratched

Despite the heavy sculpted look, the frame remains perfectly balanced and secure on the wall.

🎨 Printing Details: Nozzle: 0.4 mm Layer Height: 0.2 mm Infill: Hatch (8%) or Cubic (15%) Supports: Yes! Supports are perfectly calibrated in the 3MF file. Walls: 2

Compatible with an A1 Mini

3MF files Ready to print out-of-the-box We've fine-tuned countless custom settings ➡️ infill, speed, bridges, seams, and more. Hours of research in slicer wikis go into every file to give our Patreon supporters the best plug-and-play experience.

The included 3MF files are optimized for Bambu Studio and should work correctly with Orca Slicer and Prusa Slicer. Using them in other slicers may break alignment, colors and custom settings.

Join the conversation We’d love to see your prints! Share them on our Holoprops Discord and connect with the community.

Licensing All Holoprops models are 100% original creations, hand-sculpted with care and creativity. These models are our own intellectual property and are protected accordingly.

Personal use only. For commercial rights, join our Merchant Tier: Thangs Merchant Tier

Filaments used All filament from the Polymaker Store.

(This is an affiliate link, and if you decide to grab a roll, we get a tiny thank-you in return. We really appreciate your support!)