Heart Vase Not just a Valentine thing, but you can add a loving heartfelt touch any time of the year. This holds water (if a bouquet is what you are planning ) OR some individual sweets for your "sweets"

It can be sized slightly up or down depending on the need

Print Time 5 hrs 1 min Aux fan is OFF (if using one)

Standard PLA Profile for .04 Nozzle UNLESS otherwise stated BELOW: Elephant Foot comp 0.1 Arachne Walls 3wall loops 5 top shell 5 bottom shell 20% Gyroid Infill/wall overlap 20% No Brim Flushing set for .65 (you will need to adjust this for your filaments and machine type)

Powered by Make My Vase from MakerWorld (makerworld.com/makerlab/makeMyVase)