Gazzaladra19K followers

Rock wall shelf with face video thumbnail

Rock wall shelf with face

590 downloads · 1 year ago · **A 3d scanned rock wall shelf with a face that is only visible from a certain angle.** The shelf c

This model is restricted by licensing terms.

View license.

Description

A 3d scanned rock wall shelf with a face that is only visible from a certain angle.

The shelf comes in two sizes with a holder each. There is an extra holder included that you can scale up if you want to print it bigger. You can either screw or glue the holder onto your wall. There are various glue or tape products for wall fixation out there. I used 3M Tape. Old fashioned screws and dowels are the most reliable fixation. The screw holes have a diameter of 5.5 mm

Size big: 90 x 161 x 186 mm Size small: 67 x 121 x 140 mm

Print settings Material usage big: 240 g Material usage small: 110 g

Material: PLA Print direction: files are rotated correctly Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Infill: 15% Build plate adhesion type: none

Tags:

Community Makes (2)

Awesome design, simple to print, I watched the first layer adherence at normal speed, then set to sport mode (124% of normal print speed) to try and introduce natural rock anomalies. The mounting bracket cutout printed nicely, even with no support underneath that fairly large section.

Overture Fossil PLA is perfect for this. I had to rotate it and print it ‘top down’ to make the striations run correctly, but that added minimal supports.

Community Makes (2)

Discussions

NerdMuse1 year ago

Overture Fossil PLA is perfect for this. I had to rotate it and print it ‘top down’ to make the striations run correctly, but that added minimal supports.

PrinterBambu Lab P1S

MaterialPLA

phedrick11 months ago

Awesome design, simple to print, I watched the first layer adherence at normal speed, then set to sport mode (124% of normal print speed) to try and introduce natural rock anomalies. The mounting bracket cutout printed nicely, even with no support underneath that fairly large section.