A set of fours bowls that stack up to a full coconut! I 3d scanned one to make this design as realistic as possible. When you don’t need the bowls, you can store them in a space saving and aesthetic way. The cut in the center is intentionally designed so that the parts only fit in one way – to make the stacking easy. You can scale this design freely and print it as big as you want. The default size is the size of the actual coconut that I 3d scanned.

Instructions

• Print all parts
• Glue the top and bottom onto the shell
• Enjoy!

Size assembled: 98 x 98 x 125 mm

Print settings Required build volume: 100 x 100 x 100 mm Material usage: 200 g

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none