The creator Klausur came up with a banana bowl independently prior to me! Please check it out here and make sure to download it, too :)

A whole segment of a bunch of bananas as they grow, but it’s a bowl! The design is based on multiple 3d scans of real bananas and is printable even in life size!

Single and multi-color printing models are included as STL and 3MF! They work with all current and usual multi color setups. Besides multi color printing this design is very much suited for painting. You can get inspiration from the various ripeness stages of bananas and paint it in your preferred state.

Scaling Size The files are scaled to half of the life size to make the import into your slicer smoother. 100% size therefore means 50% of real-life size! You can scale the design freely to fit your printer and use case. The print you see in the photos is done at 150% size of the files which results in 75% of real-life size.

Print settings Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Infill: 15% Build plate adhesion type: none