A unique, whimsical hexagram lamp that uses the Maker's Supply LED Lamp Kit 001. This is an elevated version of my original hexagram lamp. The lattice frame is patterned with decorative hexagrams, giving it the appearance of a delicately-carved wooden art piece. The interior contains a “shade” that is used to help diffuse the light and gives the lamp a fascinating, soft glow.

I'm excited to see the different material and color combinations you all use with this model, so please share lots of photos!

Printing & Assembly Tips Supports are only needed for the lid, under the rim and just below the top. I recommend using a brim on the lattice, mainly because it is a fairly long print so you'll want to make sure its secure to the bed to avoid any failures late in the print. I also recommend using a wider line width for the shade if you choose to use translucent PETG.

Assembly is pretty easy.

Attach the LED lamp kit to the cutout on the base with the double-sided tape that comes in the kit.

1. Make sure the wire goes through the side with the cutout.
2. Slide the lattice into position on the base.
3. Slide the shade into the lattice - it will rest on the bottom of the lattice and won't actually contact the base.
4. Snap on the lid and screw in the top ring.
5. Bask in the glow of your new lamp!

Please like it if you do and leave any comments! If you're really feeling generous please consider buying me a coffee so I can keep creating!

Check out my TikTok!

Check out my YouTube!

If you like what you see, please consider joining my Patreon.