This is my Skeleton Dragon; it can open its mouth. You can position it or just play around with it. It doesn't need any support; you just need to attach the upper jaw and you're good to go.

Printing recommendations:

Layer height: 0.2 mm

Infill: 15-20%

Material: PLA, PETG

Nozzle: 0.4 mm

21421075mm

If you have an active club membership, you can sell the model without having to ask me. You can find more detailed information under my club.

https://www.patreon.com/Flexi__Maker

Thangs Memberships