A functional Fallout‑style desk prop that doubles as a stable can holder, built with the chunky, optimistic charm of pre‑war ceramic mugs.

The Okey Dokey Mug Can Holder features a thick‑walled body, squared handle, and stepped base designed to mimic the rugged, utilitarian shapes found throughout Fallout’s environmental props. The bold “33 Okey dokey!” graphic is modeled in layered retro typography, giving the piece a cheerful, lore‑friendly presence without drifting into parody.

This model is sized to hold a standard beverage can securely while remaining visually convincing as a ceramic mug. The base includes a recess for a self‑adhesive felt pad to prevent slipping and protect surfaces. PETG requires one felt pad. PLA requires two felt pads.

Features:

• Fallout‑inspired mug design with layered retro typography.

• Functional can holder disguised as a collectible desk prop.

• Stepped base with felt‑pad recess for stability.

• Squared handle geometry that prints cleanly on FDM machines.

• Minimal supports required for most slicer setups.

• Fits standard 12oz cans.

• Design is on both sides for left or right handedness.

Print Recommendations:

• Layer height: 0.16–0.20 mm.

• Material: PLA or PETG.

• Supports: Minimal, typically under the handle only.

• Infill: 10–15 percent.

• Felt pads: One for PETG, two for PLA.

• Optional: Paint or weathering for a more wasteland‑authentic finish.

Ideal For:

• Fallout collectors who enjoy functional props.

• Desk‑setup builders looking for themed accessories.

• Makers who appreciate clean, display‑ready prints.

3D printing settings:

Resolution: 0.2mm to 0.24mm Infill: 15% - Aligned Rectilinear Support: Yes, Organic/Tree First Layer Speed: 25mm/s First Layers: 2 Seam Alignment: Back Rotate model so that the handle is in the back to hide seam.

Materials:

Kein Blue PETG/PLA Yellow PETG/PLA White PETG/PLA

-OR-

Kein Blue PETG/PLA Paint embossed areas.

Note: You can use spray acrylic resin to coat the model and protect the paint from chipping.